Description of DIN EN 10210 and DIN EN 10219
DIN EN 10210-1
Hot finished structural hollow sections of non-alloy and fine grain steels – Part 1: Technical delivery conditions
This part of this European Standard specifies technical delivery conditions for hot finished hollow sections of circular, square, rectangular or elliptical forms and applies to hollow sections formed…
DIN EN 10210-2
Hot finished structural hollow sections of non-alloy and fine grain steels – Part 2: Tolerances, dimensions and sectional properties
This part of EN 10210 specifies tolerances for hot finished circular, square, rectangular and elliptical structural hollow sections, manufactured in wall thicknesses up to 120 mm, in the following size…
HOT FINISHED STRUCTURAL HOLLOW SECTION ACCORDING TO DIN EN 10210 MATERIAL DATA SHEET
Steel designation: | Name | Material No. |
S235JRH | 1.0039 | |
S275J0H | 1.0149 | |
S355J0H | 1.0547 | |
S355J2H | 1.0576 |
CHEMICAL COMPOSITION ( HEAT ANALYSIS IN %)
Steel grade |
Material | Type of deoxidation |
C for product thickness in mm |
Si (max) |
Mn (max) |
P (max) |
S (max) |
N (max) |
|
<=40 | 40<w.t.<=120 | ||||||||
S235JRH | 1.0039 | FN | 0.17 | 0.20 | – | 1.40 | 0.04 | 0.040 | 0.009 |
S275J0H | 1.0149 | FN | 0.20 | 0.22 | – | 1.40 | 0.035 | 0.035 | 0.009 |
S355J0H | 1.0547 | FN | 0.22 | 0.22 | <=0.55 | 1.60 | 0.035 | 0.035 | 0.009 |
S355J2H | 1.0576 | FF | 0.22 | 0.22 | <=0.55 | 1.60 | 0.03 | 0.030 | – |
DIN EN 10219-1
Cold formed welded structural hollow sections of non-alloy and fine grain steels – Part 1: Technical delivery conditions
This part of this European Standard specifies the technical delivery conditions for cold formed welded structural hollow sections of circular, square or rectangular forms and applies to structural hol…
DIN EN 10219-2
Cold formed welded structural hollow sections of non-alloy and fine grain steels – Part 2: Tolerances, dimensions and sectional properties
This part of EN 10219 specifies tolerances for cold formed welded circular, square and rectangular structural hollow sections, manufactured in wall thicknesses up to 40 mm, in the following size range…
Pipes for pipeline applications
OLD
Execution | Norm | Steel grade |
Welded | API 5L | Grade B |
Welded | API 5L | Grade X52 |
Seamless | API 5L | Grade B |
Seamless | API 5L | Grade X52 |
NEW
Execution | Norm | Steel grade |
Welded | DIN EN 10208-2 | L245NB |
Welded | DIN EN 10208-2 | L360NB |
Seamless | DIN EN 10208-2 | L245NB |
Seamless | DIN EN 10208-2 | L360NB |
* API standards will remain valid and will not be replaced by Euronorms in the near future